3.5ns,alnacare.co.in,kit,100MHz,High,700V,Ri,Probe,Voltage,/monocyte991026.html,EVTSCAN,$143,Industrial Scientific , Test, Measure Inspect , Electrical Testing,Differential $143 EVTSCAN 700V 100MHz High Voltage Differential Probe kit 3.5ns Ri Industrial Scientific Test, Measure Inspect Electrical Testing $143 EVTSCAN 700V 100MHz High Voltage Differential Probe kit 3.5ns Ri Industrial Scientific Test, Measure Inspect Electrical Testing EVTSCAN 700V 100MHz High Voltage Differential 3.5ns kit Gifts Probe Ri EVTSCAN 700V 100MHz High Voltage Differential 3.5ns kit Gifts Probe Ri 3.5ns,alnacare.co.in,kit,100MHz,High,700V,Ri,Probe,Voltage,/monocyte991026.html,EVTSCAN,$143,Industrial Scientific , Test, Measure Inspect , Electrical Testing,Differential

EVTSCAN 700V 100MHz High Voltage Differential Challenge the lowest price 3.5ns kit Gifts Probe Ri

EVTSCAN 700V 100MHz High Voltage Differential Probe kit 3.5ns Ri

$143

EVTSCAN 700V 100MHz High Voltage Differential Probe kit 3.5ns Ri

|||

Product description

Specification:



Condition: 100% Brand New
Item Type: Oscilloscope Probe
Material: ABS

ModelDP10007Bandwidth100MHZRise Time3.5nSAttenuation10X100XAccuracy±1%Maximum Input Differential Voltage (DC+AC)70V (10X)700V (100X)Maximum Common Mode Input VoltageCAT II 600VCAT I 1000VReference Noise≤15m Vrms(10X)≤60mVrms(100X)Common Mode Override Ratio≤-80dB at 50HZ≤-50dB at 1MHZ≤-60dB at 20KHZ≤-40dB at 10MHZInput Resistance8MΩ/1.25pF (Differential)4MΩ/2.5pF (Single End to Ground)Output Voltage≤7VPower1.25WPower SupplyDC 5V, USB Power SupplyOverload IndicationButton Light FlashesSizeApprox. 14.5x6x2.7cm / 5.7x2.4x1.1inInput Line LengthApprox. 45cm / 17.7inOutput Line LengthApprox. 90cm / 35.4inTemperature0℃-40℃Humidity10%-85%


Operation Instruction
1.Power Supply:
USB DC 5V Output, more portable while oscilloscope have USB interface.
2.Ground the Product:
To avoid electric shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output terminals of the product, ensure that the product is properly grounded.
3.Probe Connection:
Connect probe power input port to USB cable power output port, then connect the probe BNC port to oscilloscope or other instruments BNC port, set proper attenuation rate, and connect the probe with the measuring object.
4.Measurement:
You should estimate the tested voltage amplitude before testing, do not use if exceeds the voltage range.
5.Probe Disconnection:
First disconnect the inputs from the tested points,and then unplug the probe output and power input




Package List:

1 x Probe

2 x Clip

2 x Probe Hook

2 x Test Bar

1 x USB Cable

1 x Plastic Box

1 x Manual



EVTSCAN 700V 100MHz High Voltage Differential Probe kit 3.5ns Ri